Answer

Feb 23, 2025 - 11:35 PM
To connect your Audioengine A2+ Wireless Speakers to your device, you have two options: wireless connection and wired connection.
For a wireless connection:
1. Turn on the power via the rear panel volume/power xxxx on the A2+ Wireless powered (left) speaker.
2. The A2+ Wireless will automatically go into Bluetooth "pair mode" and the Pair button on the rear panel will start flashing.
3. On your device (phone, tablet, computer, etc.), turn on Bluetooth and go to Bluetooth preferences.
4. Select "Audioengine A2+" to pair and connect. The Pair indicator light on the A2+ rear panel should now be solid.
5. Play your music and adjust volume levels for the A2+ and your device.
6. To add additional devices, put the A2+ back into pair mode by disconnecting it from your device or by pressing the Pair button on the A2+ rear panel for about 3 seconds until the pair indicator light starts flashing. Repeat steps 3-5 to connect another device.
Note: The A2+ can wirelessly connect to only one device at a time, but it can pair and remember up to six different devices.
For a wired connection:
1. Connect an audio cable between your device and one of the inputs on the A2+ rear panel.
2. Play music and adjust the volume on the speakers and your device to your desired listening levels.
If you are using a USB audio connection:
1. Connect the included USB cable between your computer and the USB input on the rear panel of the left powered speaker.
2. If using Windows, the A2+ should be recognized automatically. For MacOS, under System Preferences/Sound/Output, select "Audioengine A2+".
Remember to adjust the volume levels on both the A2+ and your device to achieve the desired sound.
For more detailed information and troubleshooting, please refer to the Audioengine A2BT A2+ Wireless Speakers User Guide provided with your purchase.
Add New Comment