User Manual Q&AAnswer
Feb 23, 2025 - 11:11 PM
To connect the Kruger Matz KM0538 2.0 Bookshelf Active Speakers to your audio source, follow these steps:
1. Make sure both the left and right speakers are turned off before making any connections.
2. Connect the left speaker to the right speaker using the provided speaker cord. Match the speaker cord's positive (+) and negative (-) terminals to the corresponding jacks on both speakers.
3. Connect your audio source to the speakers. You have two options:
a. If your audio source has a 3.5mm headphone jack, use a 3.5mm audio cable to connect the audio source to the "Jack 3.5 mm" input on the rear panel of the right speaker.
b. If your audio source has RCA outputs, use an RCA audio cable to connect the audio source to the "RCA input" jacks on the rear panel of the right speaker.
4. Once the connections are made, connect the power adapter to the power adapter socket on the rear panel of the right speaker.
5. Plug the power adapter into a power outlet.
6. Turn on the speakers using the power on/off switch on the rear panel of the right speaker.
Your Kruger Matz KM0538 2.0 Bookshelf Active Speakers are now connected and ready to use with your audio source. Adjust the volume and other settings as desired using the controls on the rear panel of the right speaker.
Add New Comment