User Manual Q&AAnswer
Feb 23, 2025 - 10:56 PM
To connect the SmartGen BAC1203 Battery Charger to your battery, follow these steps:
1. Connect terminals L and N to alternating voltage (100~240)V using BVR 1mm2 multi-strand copper line.
2. Connect B+ and B- to the battery positive and negative terminals using multi-strand BVR1.5mm2 copper wires.
3. Connect the PE terminal (earth terminal) to the charger's shell internally.
4. Ensure that the POWER indicator on the charger illuminates, indicating that the charger is operating normally.
5. The CHARGING indicator will illuminate when the charging current exceeds 0.3A and will extinguish when the battery charging is finished.
Please refer to the SmartGen BAC1203 Battery Charger User Manual for more detailed instructions and illustrations.
Add New Comment