User Manual Q&AAnswer
Feb 23, 2025 - 10:53 PM
To install the BOSCH PVQ711F15E Induction Hob, follow these steps:
1. Check for any damage in transit and ensure that all parts are included in the delivery.
2. Refer to the appliance dimensions in the instruction manual to ensure proper installation.
3. Review the installation dimensions for flat duct bends and choose the appropriate installation variant.
4. Follow the safety clearances for the appliance, including the clearance to the overflow container and the worktop cut-out.
5. Read the general information and safety instructions carefully before proceeding with the installation.
6. Ensure that the appliance is correctly connected to the electrical system by following the instructions for the electrical connection.
7. If necessary, prepare the electrical connection by opening the mains socket and connecting the cable to the appropriate terminals.
8. Follow the instructions for the exhaust air pipe, including using a short, straight pipe with a large diameter and ensuring a 1° gradient to prevent condensate from returning.
9. If installing in circulating-air mode, use the adapter and seal provided. Attach the seal to the adapter and then insert the adapter into the outlet opening on the rear of the hob. Secure the adapter using screws if necessary.
10. If installing in air extraction mode, follow the instructions for preparing the unit and establishing the pipework between the appliance and the diffuser. Connect the exhaust air pipe and insert the filters.
11. Finally, check the units for levelness and load-bearing capacity, and ensure that the stability of the fitted unit is guaranteed.
Please refer to the BOSCH PVQ711F15E Induction Hob Instruction Manual for detailed installation instructions and diagrams.
Add New Comment