User Manual Q&AAnswer
Feb 23, 2025 - 10:46 PM
To dilute and use the ULTRA TILE Pro Clean Porcelain Tile and Stone Cleaner, follow these steps:
1. Perform a test in an inconspicuous area on-site to check the suitability of the product before use. If you experience difficulties, contact the technical support team.
2. Depending on the degree of soiling, add between 1-8 capfuls of the cleaner to 5 liters of warm water.
3. Apply the cleaning solution to the soiled area and let it sit for 1-2 minutes.
4. Mop or wipe the surface clean. The cleaner dries streak-free, so there is no need to rinse.
Please note that heavy grime, dirt deposits, silt, and sediment may require rinsing. Always try the product in an inconspicuous area before use. It remains the responsibility of the end user to check the suitability of the product.
For stubborn deposits or severe staining, it is recommended to use a more powerful formula like Xtreme Clean.
Remember to store the product in unopened bottles in a frost-free environment, away from direct sunlight. Ideal storage temperatures are between 5°C and 25°C.
For more information on health and safety precautions, disposal, and technical data, please refer to the complete user guide and technical datasheet provided.
Add New Comment