User Manual Q&AAnswer
Feb 23, 2025 - 10:41 PM
To install the ROCKER Lafil Series Suction System, please follow these steps:
1. Check the voltage specified on the nameplate and ensure it matches the line voltage in your location.
2. Install the instrument in a clean, dust-less, and ventilated area under 40°C.
3. Unpack the system and check if the package is complete without any damage.
4. Make sure you have all the accessories indicated on the list.
5. Assemble the vacuum pump and vacuum bottle as shown in the manual.
6. Connect the inlet of the vacuum pump and the outlet of the vacuum bottle with a silicone tube.
7. Connect the inlet of the vacuum bottle and the handle of the suction kit with a long silicone tube.
8. Choose the suitable fittings and plug them into the handle according to the container you are using.
9. Turn on the pump, connect the appropriate pipette tips, and press the switch to start suctioning your waste liquid.
10. After finishing the experiment, turn off the vacuum pump and clean the suction kit if needed.
Please refer to the manual for more detailed instructions and diagrams.
Note: It is important to read the entire instruction manual carefully before installing and operating the ROCKER Lafil Series Suction System.
Add New Comment