User Manual Q&AAnswer
Feb 23, 2025 - 10:31 PM
To install the LOKAR BL-1400U Back Up Light or Neutral Safety Switch Kit, please follow these steps:
1. Disconnect the negative battery cable and use wheel chocks to block the vehicle's wheels.
2. Ensure that the engine, transmission, body, and frame are properly grounded.
3. Apply anti-seize lubricant to all aluminum threads before final assembly.
4. Note that this kit offers the choice of a Back-Up Light Switch OR a Neutral Safety Switch, not both.
5. For TH350, TH400, and TH200 applications:
- Determine whether your transmission uses standard bolts or metric bolts for the transmission oil pan.
- Install the correct thread transmission pan bolts from the Lokar Kit, with the 3/8" thick spacers between the bracket and the transmission pan.
- Use the flat washers and lock washers on the bottom side of the bracket.
6. For 700-R4, 200-4R, and 4L60 applications:
- Install the 1/4" spacers and two metric bolts supplied with the Lokar Kit.
- Use the flat washers and lock washers on the bottom side of the bracket.
7. For use as a Neutral Safety Switch:
- Put the transmission in Park and install the double trigger as shown in Fig. 2, with the 3/8" internal star washer between the trigger and your original nut.
- Position the trigger so that the ball switch is depressed in Park and Neutral.
- Connect the Neutral Safety Switch between your ignition switch and starter circuits.
- Check the wiring of your fuse panel and make the necessary connections.
8. For use as a Back-Up Light Switch:
- Install the single trigger onto the transmission gear selector shaft, with the 3/8" internal star washer between the trigger and your original nut.
- Put the transmission in Reverse and make sure the ball switch is depressed.
- Check the wiring of your fuse panel and make the necessary connections.
9. Reconnect the negative battery cable and check the operation of the switch.
Please refer to the LOKAR BL-1400U Back Up Light or Neutral Safety Switch Kit Instruction Manual for more detailed instructions and illustrations.
Add New Comment