User Manual Q&AAnswer
Feb 23, 2025 - 10:24 PM
To mount the Ottobock 4R88 Sliding Adapter, follow these steps:
1. Loosen the tube clamp cap xxxx by two turns.
2. For final assembly, degrease the insertion range of the tube clamp adapter and tube adapter.
3. Insert the tube adapter fully into the tube clamp adapter up to the stop. Align the clamping slot: Tube clamp adapter: anterior, Tube clamp adapter, sliding: anterior or medial.
4. If you have the 4WR95=3 model, apply Loctite to the tube clamp cap xxxx .
5. Tighten the cap xxxx using a torque wrench according to the thread diameter: M4: 5 Nm, M5: 10 Nm, M6: 13 Nm.
Please refer to the Ottobock 4R88 Sliding Adapter Instruction Manual for more detailed instructions and illustrations.
Add New Comment