Answer

Feb 23, 2025 - 10:19 PM
To install the Apera Instruments 301Pt-C ORP Electrode, follow these steps:
1. Find the BNC socket on your pH meter where it shows pH ORP.
2. Open the rubber cap on the electrode.
3. Insert the blue BNC connector of the electrode into the BNC socket on the pH meter.
4. Twist the connector clockwise until it is locked in place.
No calibration is needed for ORP electrodes. However, if you want to double-check the condition of the electrode, you can test it in a standard ORP solution such as 222 mV. If the reading falls within the error range (+/- 15 mV), then the electrode is good to go.
Please refer to the Apera Instruments 301Pt-C ORP Electrode User Manual for more detailed instructions and information.
Add New Comment