User Manual Q&AAnswer
Feb 23, 2025 - 10:11 PM
To charge the FORCE1 Orbiter, follow these steps:
1. Turn the power switch located on the bottom of the Orbiter to the "OFF" position.
2. Connect the included USB cable to the Orbiter's charging port.
3. Plug the other end of the USB cable into a USB port, such as on a computer or a USB wall charger.
4. The red light on the Orbiter will turn on, indicating that it is charging.
5. Once the Orbiter is fully charged, the red light will turn off.
6. Charging time is approximately 20 minutes.
7. It is important not to overcharge the Orbiter. Remove it from the charger once it is fully charged.
8. Do not leave the Orbiter charging unattended.
Note: The flying time of the Orbiter is approximately 5 minutes.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment