User Manual Q&AAnswer
Feb 23, 2025 - 09:37 PM
To install the ORTECH OD-HSB201 LED Landscape Lighting Hardscape Light in a brick or hardscape wall, please follow these steps:
1. Turn off the power supply before starting the installation process.
2. Determine the desired location for each fixture and mark the location of the two xxxx holes on the wall.
3. Drill the holes for the plastic anchors using an appropriate drill bit for the material you are drilling into.
4. Place the plastic anchors into the drilled holes.
5. Position the stainless steel mounting bracket and fixture in between the layers of the hardscape material. Secure the fixture by screwing the two screws into the anchors through the holes on the bracket.
6. Route the fixture wire through the wall to the main low voltage supply cable using standard masonry procedures.
7. Connect the fixture wire to the low voltage power supply.
Please note that the installation of the ORTECH OD-HSB201 LED Landscape Lighting Hardscape Light should be carried out by a qualified electrician in accordance with the National Electric Code (NEC) and local code specifications. It is important to read and follow the instructions provided in the instruction manual to ensure proper installation and safety.
Add New Comment