Answer

Feb 23, 2025 - 09:36 PM
To install the Maidaid Halcyon AMH95WSD Water Softener Pass Through Dishwasher, please follow the instructions provided in the installation guide. Here is a step-by-step guide:
1. Unpacking: Check the condition of the packaging and note any damage. Remove the packaging and inspect the appliance for any damage. Report any damage to the reseller and shipping agent.
2. Positioning: Make sure there are no objects or materials in the installation area that may be damaged by steam emitted during operation. Set up the electrical power supply, water supply, and drain connections. Leave a space of at least 10 mm between the machine walls and adjacent surfaces for flush-mounting single panel machines. Ensure the floor or built-in unit can support the weight of the appliance. Level the appliance with its four feet. The appliance is intended for fixed installation only.
3. Electrical connection: The power supply must be fitted with a circuit breaker to break all contacts, including neutral, with a contact gap of at least 3 mm. The mains voltage and frequency must match the ratings on the nameplate. The installation must include a grounding system conforming to electrical safety legislation. Use the appropriate power cable based on the machine's specifications.
4. Water circuit hookup: Connect the appliance to the water supply using a flexible hose. Install a shut-off valve between the water supply line and the appliance's solenoid valve. Ensure the water supply, temperature, and pressure are compatible with the ratings on the machine. If the water hardness is greater than 14 °f (8 °dH), consider using an internal or external water softener.
5. Connection to the drain line: The drain line should consist of a free drain sump with a siphon suited to the flow capacity of the drain hose. The hose should be able to reach the sump without stretching, restriction, folding, crushing, pressing, or forcing. The tub drains under gravity, so the drain sump must be lower than the machine's base. If the drain is not lower than the base, consider using a version with a drain pump.
6. Rinse aid and detergent: The rinse aid and detergent are dispensed by the machine's integral dispenser. The dose is set by the installer based on the water hardness. Fill the dispenser supply tubes with their respective products before calibrating them. Use only recommended dishwasher-proof detergents and avoid chlorine or hypochlorite-based detergents.
Please refer to the instruction manual for more detailed instructions and safety precautions during installation.
Add New Comment