User Manual Q&AAnswer
Feb 23, 2025 - 09:28 PM
To install the audizio HTS35 Speaker Wall Bracket, please follow these steps:
1. Before starting the installation, make sure you have read the entire instruction manual and have all the necessary tools and parts.
2. Ensure that the supporting surface (wall) is capable of safely supporting the combined weight of the equipment and all attached hardware and components.
3. Carefully unpack all the components and check against the component checklist provided in the manual. If any parts are missing or faulty, contact your place of purchase for a replacement.
4. Attach the mounting plate to the back of the speaker using the provided screws. Make sure the plate is securely fastened.
5. Determine the desired location on the wall for mounting the speaker. Use a stud finder to locate the studs in the wall for a secure installation.
6. Hold the bracket against the wall at the desired height and mark the positions for the mounting screws.
7. Drill pilot holes at the marked positions using an appropriate drill bit size for the wall material.
8. Attach the bracket to the wall using the provided mounting screws. Ensure that the screws are tightened securely, but do not over-tighten.
9. Carefully lift the speaker with the attached mounting plate and align it with the bracket on the wall. Slide the speaker onto the bracket until it locks into place.
10. Once the speaker is securely attached to the bracket, check for stability and make any necessary adjustments.
Please note that this product should only be installed by professionals and safety gear must be used during the installation process. For any further questions or concerns, it is recommended to contact your local distributor for assistance.
Add New Comment