Answer

Feb 23, 2025 - 08:51 PM
To use the AquaLift® Self-Cleaning Technology, follow these steps:
1. Wipe out any loose debris from the oven.
2. Pour water into the oven bottom.
3. Close the oven door.
4. Select the AquaLift® Self-Cleaning cycle on the control panel.
5. The cycle will run for less than 1 hour at a lower temperature than traditional self-cleaning methods.
6. After the cycle finishes, open the oven door and wipe out the remaining water and loose debris.
For more detailed instructions, refer to the "Clean Cycle" section in your appliance's Owner's Manual. You can also visit the Maytag website at www.maytag.com for additional information, frequently asked questions, and videos on using AquaLift® Self-Cleaning Technology.
Add New Comment