User Manual Q&AAnswer
Feb 23, 2025 - 08:19 PM
To switch between different modes on the EPOMAKER FIRSTBLOOD B67 keyboard, follow these steps:
1. Wired Mode: Toggle the switch next to the USB port to the middle position to use the keyboard in wired mode.
2. Bluetooth Mode: Toggle the switch next to the USB port to the left position to use the keyboard in wireless mode. To pair a Bluetooth device, press and hold the FN key along with the Q, W, or E key for 3 seconds. The keyboard will start pairing, and the corresponding device indicator light (Q, W, or E) will flash. If the connection is successful, the device indicator light will stop flashing. To switch to the last paired Bluetooth device, simply press the FN key along with the Q, W, or E key.
3. 2.4GHz Mode: Toggle the switch next to the USB port to the right position to use the keyboard in 2.4GHz mode. Insert the receiver into your device and then press and hold the FN key along with the R key. The keyboard will start pairing, and the R indicator light will flash. If the connection is successful, the R indicator light will stop flashing.
Please note that if there is no connection, the keyboard will enter sleep mode to conserve power.
For more detailed instructions and troubleshooting, refer to the EPOMAKER FIRSTBLOOD B67 Wireless Mechanical Keyboard User Guide provided.
Add New Comment