How do I install the AVCOMM 610GX2 8+2G 1000M Managed Ethernet Switch? (AVCOMM 610GX2 8+2G 1000M Managed Ethernet Switch Installation Guide)

Answer

manuals.plus

Feb 23, 2025 - 09:19 AM

To install the AVCOMM 610GX2 8+2G 1000M Managed Ethernet Switch, follow these steps:

1. Grounding xxxx : Before connecting any devices, establish a direct connection between the grounding xxxx and the grounding surface to avoid system damage from noise or electric shock.

2. DIN Rail-mounted: If you want to mount the switch on a DIN Rail track, insert the upper end of the DIN-Rail clip into the back of the DIN-Rail track from its upper side. Lightly push the bottom of the DIN-Rail clip into the track. Make sure to use a DIN Rail that complies with the DIN EN50022 standard to ensure safe installation.

3. Wall-mounted: Tighten the metal fixation plate and then hang the switch with a locked metal strip onto the wall or machine cabinet.

4. Wiring the Power Input: Insert the positive and negative wires into the V+ and V- contacts on the terminal block connector. Tighten the screws to secure the wire connections. Connect the power wires to a suitable DC Switching type power supply.

For more detailed information on the installation process, please refer to the AVCOMM 610GX2 8+2G 1000M Managed Ethernet Switch Installation Guide.

Note: Always ensure that the power is off before connecting to the terminal block connectors and make sure to use the correct supply voltage for the device. Do not touch the surface of the switch while it is in operation.

For any further assistance or troubleshooting, you can refer to the User Manual or contact AVCOMM support through their online service forms or by emailing sales@avcomm.cn. The product also comes with a 5-year global warranty for any defects in workmanship or materials.