User Manual Q&AAnswer
Feb 23, 2025 - 09:13 AM
To mount the AVCOMM 608TX 8-Port 100M Managed Ethernet Switch on a DIN Rail, follow these steps:
1. Ensure that you have the necessary mounting plate and screws included in the package.
2. Locate the upper end of the DIN-Rail clip on the back of the switch.
3. Insert the upper end of the DIN-Rail clip into the back of the DIN-Rail track from its upper side.
4. Lightly push the bottom of the DIN-Rail clip into the track until it is securely in place.
5. Make sure that the DIN Rail you are using complies with the DIN EN50022 standard. Using the wrong DIN Rail may result in an unsafe installation.
Once the switch is securely mounted on the DIN Rail, you can proceed with the wiring and power input connections as described in the installation guide.
For more detailed instructions and illustrations, please refer to the AVCOMM 608TX 8-Port 100M Managed Ethernet Switch Installation Guide provided with the product.
Add New Comment