User Manual Q&AAnswer
Feb 23, 2025 - 04:08 AM
To install the AVER VB342 video sound bar mount on ERARD PRO stands, please follow these steps:
1. Choose the appropriate model of the mount based on your ERARD PRO stand:
- Ref. 600032: For XPO, KROSS, and KAMELEO stands (to be placed under the screen)
- Ref. 044666: For WILL and STANDiT™ stands (to be placed under the screen)
- Ref. 622008: For LUXUP stands (to be placed under the screen)
2. Ensure that you have the AVER VB342 video sound bar and the ERARD PRO stand ready for installation.
3. Position the ERARD PRO stand in the desired location, ensuring it is stable and secure.
4. Take the AVER VB342 video sound bar mount and align it with the designated mounting area on the ERARD PRO stand.
5. Use the provided screws or mounting hardware to attach the AVER VB342 mount securely to the ERARD PRO stand. Refer to the manual for specific instructions on the type and size of screws to use.
6. Once the mount is securely attached to the stand, place the AVER VB342 video sound bar onto the mount, ensuring it is properly aligned and centered.
7. Double-check that the sound bar is securely attached to the mount and the mount is securely attached to the ERARD PRO stand.
8. Adjust the position and angle of the sound bar as needed for optimal viewing and sound projection.
9. Test the setup to ensure that the sound bar is functioning correctly and providing the desired audio output.
For any further assistance or clarification, please refer to the AVER VB342 video sound bar mount's instruction manual or contact ERARD PRO directly through their website or contact information provided in the manual.
Add New Comment