User Manual Q&AAnswer
Feb 23, 2025 - 03:55 AM
To properly secure the Southwire EZLB200 Connector to the wall, please follow these steps:
1. Secure the Base (A) into the penetration in the wall. Make sure it is firmly in place.
2. Attach the Connector (B) to the conduit using the appropriate PVC cement. Ensure a secure and tight connection.
3. Pull the cable through the Connector (B) and loop it into the Base (A). Push the cable through the Conduit.
4. Align the threads on the Connector (B) with the tread grooves on the Base (A). Twist and secure them together tightly.
5. Attach and secure the Cover (C) to the Base (A) using the Screws (D). Make sure to properly seal the gasket to ensure a watertight seal.
6. Lastly, properly strap the conduit to the wall to provide additional support and stability.
Please note that these instructions are a general guideline. For specific details and any additional information, please refer to the Southwire EZLB200 Connector Instruction Manual.
Add New Comment