How do I connect my Audioengine 2+ speakers to my computer? (Audioengine 2+ Premium Powered Desktop Speaker User Guide)

Answer

manuals.plus

Feb 23, 2025 - 03:47 AM


To connect your Audioengine 2+ speakers to your computer, follow these steps:

Step 1: Connecting the speaker wire
- Unscrew the connectors on the back of the speakers using your thumb and finger.
- Insert each speaker wire into the holes on the side of the connectors.
- Retighten the connectors with your fingers, ensuring that the bare portion of the wire is secured firmly in each connector.
- Repeat the procedure to connect the other end of the speaker wire to the other speaker.

Step 2: Connecting the Power Supply
- Verify that the volume/power switch on the rear panel of the left speaker is in the OFF position by rotating it counterclockwise until it clicks off.
- Connect the cable from the power supply to the left speaker rear panel.
- Connect the power cable to the other end of the power supply.
- Connect the power cable to an AC power outlet.
- Verify that the LED indicator on the power supply is illuminated.
- Use only the power supply provided with the speakers.

Step 3: Connecting an Audio Source
- Using the appropriate audio cable, connect the speaker inputs to your audio source (computer, iPhone, iPad, etc.).
- For connecting a computer, you can use the included USB cable. Connect one end to your computer's USB port and the other end to the USB input on the speakers.

Step 4: Enjoying your Speakers
- Turn on the rear panel volume/power  xxxx  on the left speaker and set the volume control to about 3 o'clock.
- Turn on your audio source and adjust the volume to your desired listening level.

Note: Two audio sources can be connected to the speakers at the same time. To adjust the volume, it is recommended to use individual volume controls on each source.

For more advanced setup tips and troubleshooting, you can refer to the Audioengine 2+ Premium Powered Desktop Speaker User Guide provided with the product.