User Manual Q&AAnswer
Feb 22, 2025 - 10:45 AM
To install the Smeg KSEG Series Hood, follow these steps:
1. Remove the grease filters and set them aside.
2. Remove the bottom of the Range Hood by pulling it forward.
3. Create an opening in the bottom of the cabinet where you want to install the hood.
Note: The cabinet must be accessible for future maintenance.
4. Insert the hood until the side supports snap into place.
5. Lock the hood in position by tightening the screws from underneath.
6. Fasten the hood using the provided screws.
7. Replace the bottom of the Range Hood and secure it with screws.
8. Place the grease filters back into the hood.
For more detailed instructions and illustrations, please refer to the Smeg KSEG Series Hood Installation Guide.
Add New Comment