User Manual Q&AAnswer
Feb 22, 2025 - 10:07 AM
To charge the battery pack for the DR Power PRO-62V DR Battery Powered Yard Tools 62V Blower, follow these steps:
1. Make sure the charger power supply is plugged into a normal household voltage, 120 volts, 60Hz, AC only.
2. Operate the battery charger in a dry place with temperatures between 50ºF (10ºC) and +100ºF (+37.8ºC). Operating above +100 ºF can cause battery pack leakage, rust, or degradation of the battery pack performance.
3. Connect the charger to a 120VAC outlet. When the battery is not installed (no load condition), the red LED will be lit.
4. Insert the battery into the charger. Under normal charging, the green LED will blink.
5. When the battery is fully charged, the green LED will remain lit, indicating that charging is complete.
6. Unplug the charger from the outlet and remove the battery from the charger.
Note: Detailed instructions for charging and maintaining the battery/charger can be found in Chapter 4 of the instruction manual provided with the DR Power PRO-62V DR Battery Powered Yard Tools 62V Blower.
Add New Comment