User Manual Q&AAnswer
Feb 22, 2025 - 09:57 AM
To adjust the temperature settings on the TEFCOLD LPD900-1503 Refrigerated Glass Cabinets, follow these steps:
1. Locate the thermostat, which is placed in the bottom panel of the cabinet.
2. The thermostat has been pre-set, and in most cases, it is not necessary to adjust the settings. When turning on the cabinet, the display will show the current temperature in the cabinet.
3. To view the set temperature, press the "Display set temperature" key. Press the key again to return to normal reading.
4. If you need to change the set temperature, press and hold the "Set new temperature" key continuously for more than 3 seconds. The display will show the set temperature.
5. Use the "Increase set temperature" key to raise the set temperature or the "Lower set temperature" key to lower it.
6. Once you have set the desired temperature, press the "Save new settings" key. The display will flash with the new value and then return to normal reading.
Please note that if the cabinet has been tilted during transport, it is recommended to wait 2 hours before starting up the cabinet.
Add New Comment