User Manual Q&AAnswer
Feb 22, 2025 - 09:50 AM
To set up the AudioRange ITE-1000 In-Ear TV Headset using analog connections, please follow these steps:
1. Plug the red/white RCA cables into the matching ports on your TV.
2. Plug the 3.5mm end of the RCA cables into the dock of the headset.
3. Turn on your TV.
4. Turn on the dock by sliding the switch located on the back of the dock into the mono or stereo position.
5. Remove the headphones from the dock and switch the power to the on position.
6. Confirm that there is a blue light on both the headset and the dock.
If you are unable to hear any sound, please follow these troubleshooting steps:
1. Increase the volume on your headset.
2. Increase the volume on your TV.
3. Check that your TV's audio settings are set to "Analog Audio Out (Fixed)".
4. Make sure your cables are plugged in appropriately to the back of the dock and TV.
5. Check that your TV's audio settings are set to external speaker.
If you still encounter issues, please refer to the troubleshooting section of the user guide or contact AudioRange customer support at support@audiorange.com or (866) 462-1588 for further assistance.
Add New Comment