User Manual Q&AAnswer
Feb 22, 2025 - 09:27 AM
To install the battery in the jetec THD8 E USB Data Logger Temperature and Humidity, follow these steps:
1. Push the tenon as instructed by the arrow and remove the battery cover.
2. Place the battery vertically on the battery groove.
3. Make sure the positive side of the battery contacts the positive spring plate first.
4. Push the negative side of the spring to fix the battery position.
5. Replace the battery cover.
6. The battery installation is now complete.
Please refer to the instruction manual for visual illustrations of the battery installation process.
Add New Comment