User Manual Q&AAnswer
Feb 22, 2025 - 09:26 AM
To mount the Honeywell Midas-M Multi Gas Relay Module, follow these steps:
1. Pull out the four screws and remove the plate cover.
2. Partially xxxx the fixings into the mounting surface.
3. Place the Relay module over the screws, so they pass through the holes to locate in the slots.
4. Tighten the screws to fix the Relay Module to the surface.
5. Connect the wire through the cable gland to the terminal block.
6. Place the plate cover in position and xxxx the four screws you removed in Step 1.
7. Push the mounting bracket assembly horizontally and engage the Relay Module connector.
8. Align the xxxx holes and the slot-boundaries, and tighten the machine screws (3016D0355) provided in the packaging.
9. Connect the mounting bracket assembly to the Relay Module.
For more detailed instructions and illustrations, please refer to the Honeywell Midas-M Multi Gas Relay Module User Manual.
Add New Comment