User Manual Q&AAnswer
Feb 22, 2025 - 09:23 AM
To install the Honeywell Midas-M Multi Gas Sensor Cartridge, follow these steps:
1. Turn off the power.
2. Open the door and remove the BiAS battery module and the two plug caps.
3. Align the Sensor cartridge pins with the socket in the sensor cartridge chamber and gently push the sensor cartridge until it is fully seated.
4. Close the door.
5. Press the 'O' button to clear the "Detect New Cartridge" message.
6. Confirm that the green LED is flashing, and that the yellow and red LEDs are off.
7. Confirm that the display shows a concentration of zero (as appropriate).
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment