How do I schedule the robot vacuum to clean at a specific time? (PURE CLEAN PUCRC95UK Smart Robot Vacuum Cleaner User Manual)

Answer

manuals.plus

Feb 22, 2025 - 09:19 AM

To schedule the robot vacuum to clean at a specific time, please follow these steps:

1. Make sure the robot vacuum is in standby or charging on the docking station.
2. Set the real time on the remote control by long pressing the CLK button for 3 seconds. Use the upward/downward buttons to adjust the hour and minute, and press the left button to set the week day.
3. After setting the real time, point the remote control towards the robot signal receiver.
4. Long press the PLAN button on the remote control for 3 seconds to enter the hour-scheduling setting. The left two numbers on the remote display will flash.
5. Use the upward/downward buttons to increase or decrease the hour (0-23). Press the left button to switch to minute-scheduling setting, and use the upward/downward buttons to increase or decrease the minutes.
6. Press the ON/OFF button on the remote control to confirm the scheduling. The icon will stay on the remote display, and the CLEAN indicator on the robot will stay pink for 2 seconds and beep once, indicating that the scheduling was successful.

To cancel the scheduling, follow these steps:

1. Point the remote control towards the robot signal receiver.
2. Long press the PLAN button on the remote control for 3 seconds to enter the hour-scheduling setting.
3. Set the time to 00:00.
4. Press the ON/OFF button on the remote control to confirm the canceling. The icon will disappear, and the CLEAN indicator on the robot will flash pink for 2 seconds and beep twice, indicating that the scheduling has been canceled successfully.

Please note that if the robot is switched off or powered off, the scheduling will be canceled. Make sure to keep the power button of the robot and charging station on if you want to keep the scheduling when you're not at home.