User Manual Q&AAnswer
Feb 22, 2025 - 08:52 AM
To install the IKA-2H Household Gas Hob, follow these steps:
1. Unwrap the packing carton and take out the hole-punching template.
2. Punch embedding holes on the countertop according to the size of the template or the dimensions provided.
3. Leave a space of over cm2 at the bottom of the cupboard for air inlet.
4. Ensure that the gas hob is installed at least 150mm away from other articles and there is a space of over 100cm above it.
5. Keep a distance of 50-100cm between the gas hob and the gas cylinder.
6. The rubber gas admitting pipe should be no longer than 150cm and should not cross through the bottom of the gas hob.
7. Remove the foam underlay, packing bag, and dustproof cover.
8. Install the specialized gas-admitting pipe and tightly secure it with a pipe clamp.
9. Check for any gas leakage using soap liquid.
10. Open the battery box at the bottom of the gas hob and insert two 1# batteries under the correct polarity.
11. Stick the rubber mud strip to the bottom shell along the lower surface of its circumambience.
12. If using the gas hob as a table-top type, no need to punch embedding holes on the countertop. Simply install four feet on the bottom for operation.
Please refer to the manual for detailed illustrations and instructions on the installation process.
Add New Comment