User Manual Q&AAnswer
Feb 22, 2025 - 08:45 AM
To connect the to your amplifier or radio, follow these steps:
1. Locate the wire on the back of the speaker labeled "Output" and the corresponding terminals on your amplifier or radio. The standard colors on the terminals are red for Positive (+) and black for Negative (-).
2. Connect the red wire of the amplifier to the speaker's Positive (+) terminal. Connect one end of the black wire to the Negative (-) terminal.
3. Repeat the above step for the other speaker.
4. Make sure that the polarity of the speakers is not inverted (+ and -). If the polarity is reversed, the sound will be unnatural and lack bass.
5. There will be a prompt sound when the BT (Bluetooth) is connected.
Note: It is recommended to lower the sound volume when changing the input source (e.g., tuning FM/CD) and to ensure that the power amp/amplifier device is turned off when installing or removing the cables.
For more detailed instructions and illustrations, please refer to the user guide provided with the PYLE PDWR59BTB speakers.
Add New Comment