User Manual Q&AAnswer
Feb 22, 2025 - 08:22 AM
To install the MODENA WE 1310 BGWH Water Filtration unit, please follow these steps:
1. Before first use, leave the appliance for 1 hour to stabilize the refrigerant.
2. Install the pipe to the water bottle and install the cover to the bottle tip.
3. Insert the bottle into the bottom cabinet and close the door.
4. Plug the power cord into the power socket. Make sure that the power source is properly grounded to prevent current leakage. Turn on the switch in the back of the appliance.
5. For first use, the inside of the appliance must be cleaned. Press the hot and cold water button. Make sure the water is dispensed from the tap. After the water is dispensed, wait for 20 minutes and remove the water bottle from the cabinet and drain the water from the unit by opening the drain water hole cover. Ensure that the power cord is unplugged when draining the water.
6. If the water is empty, turn off the heating switch before replacing the bottle with a new one.
7. If the Filter Change Indicator is flashing, replace the filter. Filters must be changed periodically to ensure good performance and water quality.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment