How do I install and align the Electric Mounting Adapter with the NZM7 switch? (EATON Electric Mounting Adapter Instruction Manual)

Answer

manuals.plus

Feb 22, 2025 - 08:08 AM

To install and align the NZM2-XAP7 Electric Mounting Adapter with the NZM7 switch, please follow the instructions below:

1. Ensure that the installation, commissioning, and maintenance work is carried out by qualified personnel only, as electric current can be dangerous to life.

2. If you are using the NZM7 switch with the NZM2-XAP7 adapter, you need to shorten the axle by 28 mm (1.1") to ensure proper alignment. This step is necessary to ensure that the rotary actuators and switches are aligned with each other.

3. Refer to the instruction manual provided with the NZM7 switch for guidance on shortening the axle. Follow the instructions carefully to avoid any damage or incorrect alignment.

4. Once the axle has been shortened, proceed with the installation of the NZM2-XAP7 Electric Mounting Adapter. Ensure that all necessary safety precautions are taken during the installation process.

5. Align the rotary actuators of the NZM2-XAP7 adapter with the switches of the NZM7 switch. This alignment is crucial to ensure proper functioning and operation of the equipment.

6. Once the alignment is complete, secure the NZM2-XAP7 adapter in place according to the manufacturer's instructions. Double-check all connections and ensure that everything is properly tightened.

7. After installation, perform a thorough inspection to ensure that all components are securely installed and aligned. Test the equipment to verify its proper operation.

Please note that the above instructions are a general guideline. It is essential to refer to the specific instruction manual provided by Eaton for the NZM2-XAP7 Electric Mounting Adapter for detailed and accurate installation instructions.