User Manual Q&AAnswer
Feb 22, 2025 - 07:54 AM
To assemble the ETA260790000 NAOS Stand Fan, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Remove any packaging and protective material from the appliance and accessories before first use.
2. Refer to Figure 1 in the manual for the assembly process.
3. Prior to mounting the plastic connecting collar (A13), loosen the clip (A14) and the xxxx (A16) so that you can easily put the collar on the rear and front protecting cover (A9/A15).
4. After putting the collar on, tighten the clip (A14) and xxxx (A16) slightly.
5. Adjust the desired height by tightening the nut (A5) and secure it in place.
6. To disassemble, follow the steps in reverse order.
Note: The shaft (A1) and the propeller nut (A12) have an anti-clockwise thread for safety reasons.
For more detailed instructions and illustrations, please refer to the manual provided with the product.
Add New Comment