User Manual Q&AAnswer
Feb 22, 2025 - 07:39 AM
To connect devices to the Dahua DH-PFS4212-8GT-96 switch, follow these steps:
1. For Ethernet devices:
- Use standard RJ-45 Ethernet cables to connect the devices to the 10/100/1000 Mbps self-adaptive PoE power supply ports (numbered 1-8) on the front panel of the switch.
- The switch supports MDI/MDI-X self-recognition, so you can use either a cross-over cable or a straight-through cable to connect the devices.
2. For uplink devices:
- Use standard RJ-45 Ethernet cables to connect the devices to the 10/100/1000 Mbps self-adaptive uplink ports (numbered 9 and 10) on the front panel of the switch.
- The switch supports MDI/MDI-X self-recognition, so you can use either a cross-over cable or a straight-through cable to connect the devices.
3. For fiber devices:
- Use SFP (Small Form-factor Pluggable) modules to connect fiber devices to the 1000 Mbps self-adaptive SFP fiber ports (numbered 11 and 12) on the front panel of the switch.
- Make sure to wear antistatic gloves and an antistatic wrist strap when installing the SFP modules.
- Insert the SFP module into the SFP slot and ensure it is firmly connected.
Please refer to the "Connecting Ethernet Port" and "Connecting SFP Port" sections in the user manual for more detailed instructions and illustrations.
Add New Comment