User Manual Q&AAnswer
Feb 22, 2025 - 07:25 AM
To install the Honeywell T3019W0NA Thera-6 Thermostatic Radiator Valve, please follow the installation instructions provided in the manual. Here is a step-by-step guide:
1. Before installation, make sure to turn off the heating system and allow the radiator to cool down.
2. Remove the existing manual valve head from the radiator by unscrewing it counterclockwise.
3. Clean the valve body threads and apply a small amount of pipe joint compound or PTFE tape to ensure a proper seal.
4. xxxx the Honeywell Thera-6 valve onto the radiator valve body by turning it clockwise. Ensure it is tightened securely.
5. Connect the valve to the radiator using the appropriate adapter or union provided.
6. If necessary, adjust the valve orientation by loosening the locking nut and rotating the valve body to the desired position. Tighten the locking nut to secure the position.
7. Connect the thermostat head to the valve body by aligning the pins and turning it clockwise until it locks into place.
8. Turn on the heating system and test the valve by adjusting the thermostat head to the desired temperature. The valve should open and close automatically to regulate the heat output.
For more detailed instructions and illustrations, please refer to the Honeywell T3019W0NA Thera-6 Thermostatic Radiator Valve Instruction Manual provided with the product.
Add New Comment