User Manual Q&AAnswer
Feb 22, 2025 - 06:58 AM
To balance the FeiyuTech SCORP Mini gimbal, follow these steps:
1. Unlock the tilt lock and loosen the slide arm lock xxxx .
2. Rotate the tilt axis so that the camera lens is pointing upward. Check the direction in which the lens tilts.
3. If the lens tilts to one side, move the slide arm to the opposite direction until the camera is steady pointing upward.
4. Tighten the slide arm lock xxxx while holding the camera.
5. Rotate the tilt axis so that the camera lens is pointing forward. Check the direction in which the lens tilts.
6. If the lens tilts to one side, unlock the quick release plate safety lock and move the quick release plate to the opposite direction until the camera is steady pointing forward.
7. Lock the quick release plate safety lock while holding the camera.
8. The tilt axis is balanced when the camera is steady while tilted up or down by 45°.
9. Repeat the above steps for balancing the roll axis and pan axis.
For more detailed instructions and illustrations, please refer to the FeiyuTech SCORP Mini user manual.
Add New Comment