User Manual Q&AAnswer
Feb 22, 2025 - 06:57 AM
To install the batteries for the ROBOLIZARD 17021 Remote Control, you will need 3 x 1.5V AAA batteries for the remote control and 4 x 1.5V AAA batteries for the body of the Robolizard. Please note that batteries are not included with the product. Here are the steps to install the batteries:
1. Use a screwdriver to release the screws under the remote control's battery cover.
2. Remove the battery cover.
3. Insert the 3 AAA batteries into the slots in the remote control, making sure to match the correct polarity ("+" and "-").
4. Close the battery cover and tighten the xxxx again.
5. Repeat the same process with the body of the Robolizard, inserting the 4 AAA batteries into the appropriate slots with the correct polarity.
6. Make sure all batteries are securely installed before proceeding.
Please remember to follow the battery safety information provided in the user manual, such as only allowing adults to install and replace batteries, using the recommended alkaline batteries for best performance, and disposing of exhausted batteries responsibly.
Add New Comment