User Manual Q&AAnswer
Feb 22, 2025 - 04:45 AM
Only skilled electricians should install the Eltako FL62-230V Wireless Light Actuator to avoid the risk of fire or electric shock. The actuator should be installed in a location with a temperature range of -20°C to +50°C and a storage temperature range of -25°C to +70°C. The relative humidity should be kept below 75% on an annual average.
The actuator is designed for 230V AC power supply and can handle incandescent lamps, halogen lamps, ESL, and 230V LED lamps within specific wattage limits. The terminals are plug-in terminals suitable for conductor cross-sections of 0.2 mm2 to 2.5 mm2.
During installation, wait for the short automatic synchronization before connecting the switched user to the network. The actuator can be controlled wirelessly using compatible Eltako wireless push buttons, motion sensors, and central control push buttons. It can also be controlled locally by a conventional 230V control switch if it was previously installed.
Please refer to the instruction manual for the specific wiring connections and installation guidelines for your application.
Add New Comment