How do I perform a chlorine test using the MACHEREY-NAGEL 931235 VISOCOLOR ECO Chlorine 1 Test Kit? (MACHEREY-NAGEL 931235 Visocolor ECO Test Kit Instruction Guide)

Answer

manuals.plus

Feb 22, 2025 - 04:35 AM


To perform a chlorine test using the MACHEREY-NAGEL 931235 VISOCOLOR ECO Chlorine 1 Test Kit, please follow the instructions provided in the manual:

1. Sample Preparation:
   - Rinse a reaction tube (16 mm OD) several times with the sample you want to test.
   - Fill the reaction tube with 5 mL of the sample using the 5 mL syringe provided.
   - Add 0.6 mL of F-1 reagent to the reaction tube using the 1 mL syringe.
   - Close the reaction tube and mix the contents.

2. Blank Value:
   - Fill another reaction tube (16 mm OD) with 5 mL of distilled water using the 5 mL syringe.
   - Add 0.6 mL of F-1 reagent to the reaction tube using the 1 mL syringe.
   - Close the reaction tube and mix the contents.

3. Reaction Time:
   - Allow the reaction to proceed for 1 minute.

4. Measurement:
   - Call up the method for measurement as specified in the manual.

5. After Use:
   - Rinse out both reaction tubes thoroughly and seal them.

Please note that additional information on safety precautions, disposal, and storage can be found in the safety data sheet, which can be downloaded from the MACHEREY-NAGEL website at www.mn-net.com/SDS.

If you have any further questions or concerns, you can contact MACHEREY-NAGEL GmbH & Co. KG directly at the provided contact information:

MACHEREY-NAGEL GmbH & Co. KG
Neumann-Neander-Str. 6–8
52355 Düren, Germany
Tel.: +49 24 21 969-0
Fax: +49 24 21 969-199
Email: info@mn-net.com
Website: www.mn-net.com