Answer

Feb 22, 2025 - 03:42 AM
To reset the unpolite device to its factory settings, follow these steps:
1. Locate the hardware reset button on the device.
2. Using a paper clip or similar tool, press and hold the hardware reset button. This will trigger a power cycle.
3. After the device has booted up, press the factory reset button three times within 2 seconds. The factory reset button is also located on the device.
4. The device will restore the following settings to their default values:
- Modbus baudrate
- BACnet saved MAC address
- Wi-Fi MQTT broker setting (for Wi-Fi model)
Please note that performing a factory reset will erase any custom settings or configurations you have made on the device.
Add New Comment