User Manual Q&AAnswer
Feb 22, 2025 - 03:05 AM
To connect your microphone and guitar to the ALTO PROFESSIONAL TS410 loudspeaker, follow these steps:
1. For the microphone:
- Connect your dynamic microphone to Input 1 on the rear panel of the loudspeaker using an XLR or 1/4" (6.35 mm) TRS cable.
- Adjust the Input Level xxxx for Input 1 to set the desired level for your microphone.
2. For the guitar:
- If your guitar has active pickups, connect it to Input 2 on the rear panel of the loudspeaker using a 1/4" (6.35 mm) TS or TRS cable.
- If your guitar has passive pickups, it is recommended to connect it to an external preamp or direct input (DI) box. Then, connect the line-level output of the preamp or DI box to the loudspeaker.
Note: It is recommended to use dynamic microphones with the TS4 Series loudspeaker instead of condenser microphones. If you are using a microphone that requires +48V of phantom power, connect it to an external phantom power supply before connecting it to the loudspeaker.
Please refer to the user guide for more detailed instructions and illustrations on connecting your microphone and guitar to the ALTO PROFESSIONAL TS410 loudspeaker.
Add New Comment