Answer

Feb 22, 2025 - 02:50 AM
To assemble and install the TRIO LIGHTING 672819202 Floor Ceiling Lamp, please follow the steps below:
1. Safety Precautions:
- Before starting the assembly, carefully read and understand all the safety instructions provided in the manual.
- Make sure to disconnect the lamp from the power source before assembly.
2. Unpacking:
- Open the package and ensure that all the parts are included.
- Check for any visible damage. If you find any, contact the manufacturer for assistance.
3. Assembly:
- Start by attaching the base to the lamp pole. Align the holes on the base and the pole, then secure them together using the provided screws.
- Next, attach the lampshade to the top end of the pole. Align the holes and secure them together using the provided screws.
- Ensure that all connections are tight and secure.
4. Installation:
- Choose a suitable location for the lamp, either on the floor or ceiling.
- If installing on the floor, place the lamp in the desired position and ensure it is stable.
- If installing on the ceiling, follow the appropriate installation guidelines for your specific ceiling type. It is recommended to consult a professional electrician for ceiling installation.
- Connect the lamp to a suitable power source using the provided power cord.
- Ensure that the power source matches the lamp's specifications (230V~50Hz 1 x LED / 31W).
5. Testing and Operation:
- Once the lamp is securely installed and connected to the power source, switch it on to test the functionality.
- If the lamp does not turn on or there are any issues, refer to the troubleshooting section in the manual or contact the manufacturer for assistance.
Please note that the above instructions are a general guide based on the information provided. For more specific details and illustrations, it is recommended to refer to the instruction manual that came with the TRIO LIGHTING 672819202 Floor Ceiling Lamp.
Add New Comment