Answer

Feb 22, 2025 - 02:39 AM
To determine the correct size of the SHOKZ OpenRun Pro Open-Ear Bone Conduction Wireless Headphones, you can use a tailor's measuring tape or a flexible cable (such as a USB cable) and a ruler. Follow these step-by-step instructions:
1. If using a tailor's measuring tape, align the left side of the tape behind your left ear. If using a cable, align the left side of the cable behind your left ear.
2. Hold the end of the cable or measuring tape still on the left side and pull the right side along the back of your head until it meets your right ear. Identify the point where the right side and your right ear meet and remember your measurement. You can also use a cable for this step.
3. If using a tailor's measuring tape, note down the measurement. If using a cable, straighten the cable and measure it with a ruler.
Based on your measurement, you can determine the perfect fit:
- Standard Size: If your measurement is more than 9.25 inches (23.49 cm).
- OpenRun Pro Mini: If your measurement is 9.25 inches (23.49 cm) or less.
Please note that each head size and shape is unique, so recommended measurements may vary slightly. If you are unsure, it is recommended to choose the standard size of the OpenRun Pro. If you need further assistance, you can visit the Help Center for additional support.
Additionally, there is a printable tool available. Print the page at 100% without scaling to fit. Cut out the tool and begin measuring by aligning the left side (L) behind your left ear. Pull the right side (R) along the back of your head until it meets your right ear, making a crease at the point where the right side and your right ear meet. The perfect fit can be determined based on the crease:
- Standard Size: If the crease is to the right of the marked line.
- OpenRun Pro Mini: If the crease is on or to the left of the marked line.
Again, please keep in mind that head size and shape can vary, so measurements may slightly differ. If you are unsure, it is recommended to choose the standard size or seek assistance from the Help Center.
Add New Comment