User Manual Q&AAnswer
Feb 22, 2025 - 02:33 AM
To install the Nuki Keypad 2.0 with Fingerprint Reader, please follow the steps outlined in the enclosed installation instructions. Here is a general overview of the installation process:
1. Clean the surface: Before using the adhesive pad, make sure the surface is cleaned with residue-free cleaning agents and free of any grease.
2. Check compatibility: Ensure that the Nuki Keypad 2.0 is compatible with your Nuki Actuator.
3. Power supply: The Nuki Keypad 2.0 is battery-powered and requires 4x AAA Alkaline (1.5V) or Lithium (1.5V) batteries. Make sure to use non-defective and non-deformed batteries.
4. Connect to the actuator: The Nuki Keypad 2.0 connects to the Nuki Actuator via Bluetooth. Follow the pairing instructions provided in the installation guide to establish a connection.
Please refer to the detailed installation instructions included with the product for specific guidance and any additional information.
Note: If your surface is made of materials other than metal or similarly smooth surfaces, it is recommended to contact Nuki customer service for further assistance.
For any further questions or support, you can contact Nuki customer service via email at service@nuki.io or visit nuki.io/help for alternative contact methods.
Add New Comment