Answer

Feb 22, 2025 - 02:06 AM
To properly adjust the spring tension on the audizio MAD30G Triple PC Monitor Bracket, follow these steps:
1. First, position and firmly hold the arm horizontally as shown in the manual. If needed, ask for assistance.
2. To avoid damage to monitors or the mount, always keep the arm in a horizontal position while making adjustments. Again, ask for assistance if required.
3. If the arm drops, turn the adjustment xxxx counter-clockwise until it stays in a horizontal position.
4. If the arm rises, turn the adjustment xxxx clockwise until it stays in a horizontal position.
5. Be careful not to over tighten the screws.
It is important to note that the manual advises using the supplied Allen Key to adjust the spring tension. Additionally, it is recommended to avoid over tightening the screws to prevent damage.
Please refer to the audizio MAD30G Triple PC Monitor Bracket Instruction Manual for more detailed instructions and illustrations.
Add New Comment