User Manual Q&AAnswer
Feb 22, 2025 - 01:47 AM
There are two ways to determine if the GigaSync has found the synchronization pulse:
1. From the interface: Open the main menu (accordion) and select the SYNC tab. Next to the two selectable sources (internal GPS and SYNC-IN port), there are two indicators. If the pulse has been recognized, these indicators will be green. It is important to note that the source does not need to be selected for this to happen.
2. From the front LEDs: The SYNC LED on the GigaSync flashes once a second when a pulse is present. However, please note that this is only valid for the selected sync source.
For more information and detailed instructions, please refer to the product manual available on the website www.9dot.it.
Add New Comment