User Manual Q&AAnswer
Feb 22, 2025 - 01:43 AM
The installation of the KT 4, 6 Way Commander Smart Touch Switch Panel is simple and can be done as a DIY project. Here are the steps to install the switch panel:
1. Start by disconnecting the power source to ensure safety during installation.
2. Determine the location where you want to install the switch panel. It should be easily accessible and within reach.
3. Use the provided mounting screws to secure the switch panel in place. Make sure it is firmly attached to the surface.
4. Connect the wiring terminals at the rear of the switch panel to the corresponding electrical circuits or devices you want to control. Follow the wiring diagram provided in the user manual for proper connections.
5. Once the wiring is complete, reconnect the power source.
6. To turn on or off a circuit, simply touch the power on/off switch on the display. The switches on the panel will illuminate in blue for active circuits and amber for inactive circuits.
7. The switch panel also includes 96 programmable icons that can be used to label each circuit for easy identification. Choose the desired icon and insert it into the designated slot on the panel.
Please refer to the user manual for additional information and safety precautions during installation.
Add New Comment