User Manual Q&AAnswer
Feb 22, 2025 - 12:46 AM
To set the baud rate for the RUNZE FLUID SV-06 Multiport Selector Valve, you can use the query command 0x21 for RS232 baud rate, 0x22 for RS485 baud rate, and 0x23 for CAN baud rate. These commands will return the current baud rate settings.
For example, to query the RS232 baud rate, you can send the command 0x21 with the parameter 0x0000. The response will contain the current RS232 baud rate setting.
To set the baud rate, you can use the factory command 0x01 for RS232 baud rate, 0x02 for RS485 baud rate, and 0x03 for CAN baud rate. These commands require additional parameters to specify the desired baud rate.
For example, to set the RS232 baud rate to 19200bps, you can send the factory command 0x01 with the parameter 0x0001. This will change the RS232 baud rate to 19200bps.
Please refer to the "Factory Command/Status List" section of the user manual for more details on the command format and parameter values.
Add New Comment