User Manual Q&AAnswer
Feb 22, 2025 - 12:36 AM
To mount the Einhell Power X-Fastcharger 4A Battery Charger on a wall, follow these steps:
1. Ensure that you have the correct dimensions for drilling holes in the wall. The dimensions can be found on the back of the charging unit.
2. Use suitable screws, such as 3.5 mm pan-head screws, to mount the charger on the wall. This will prevent damage to the housing and reduce the risk of falling.
3. Maintain spacing distances of at least 10 cm from the wall on the right and left sides of the charger, and at least 100 cm from the ceiling.
Please note that when mounting the charger on a wall, it is important to ensure proper installation to prevent any accidents or damage. If you are unsure about the installation process, it is recommended to seek assistance from a professional or contact the manufacturer for further guidance.
Add New Comment