User Manual Q&AAnswer
Feb 22, 2025 - 12:29 AM
To pair the remote control with the fan receiver, follow these steps:
1. Turn off the mains supply to the fan by using the on/off wall switch.
2. Install the batteries into the remote control, ensuring the correct polarity.
3. Turn on the power to the fan receiver.
4. Press and hold the "Forward/Reverse" button on the remote control for 10 seconds within 30 seconds of switching the power on to the fan receiver.
5. You will hear a notification beep sound from the receiver, indicating that the pairing process is successful.
6. Turn on the fan and change the speed using the remote control to check the operation and successful pairing.
Note: If you have multiple DC ceiling fans installed in the same location, each fan's remote and receiver need to be paired separately. Make sure to follow the same process for each fan, ensuring that the power is only on for the specific fan you are pairing.
Add New Comment